$349.00 CAD |
Or as low as $61.24/month over 6 months. Apply Now
S-SERIES: BENCHMARKING A WHOLE NEW LEVEL OF PERFORMANCE
The S-Series subwoofers are designed with increased bass output and installation versatility. These hard-working subwoofers add bass and impact to your music without stretching your wallet. All S-Series subwoofers are sold as single pieces.
Max RMS Power Capacity: 600W RMS
Peak Power Capacity: 1800W Peak Power
- 12 2 2 Subwoofer
- Power Handling: 600W 1800W
- High Strength Custom Steel Frame
- Great complement to V-Power Amplifiers
- Frequency Response: 26Hz-200Hz
- Mounting Depth 5-1/16
- Recommended Sealed Box: 0.85 cubic foot (gross volume)
- Recommended Vented Box: 1.71 cubic foot (gross volume), 12.5 x 1 vent area, 16 vent length
Along with the new 8 woofer, the 10 and 12 S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10 and 12 subwoofers are almost 1 more shallow than previous models at just over 4.5 for the 10 models and just over 5 for the 12 models, allowing them to fit into a wide variety of installation applications.
600W POWER HANDLING
The 10 and 12 S-Series subwoofers are engineered with an improved voice coil allowing the woofer to benefit from an increased power rating of 600 watts. Match them with the powerful VPower MRV-M500 mono amplifier for a great subwoofer system.
CUSTOM-STAMPED STEEL FRAME
Each S-Series subwoofer uses a custom-stamped steel frame. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents as well as a vented back plate to help cool the subwoofer voice coil and motor parts, plus a shallow design to help fit in smaller spaces.
PUSH-TYPE INSERT TERMINALS WITH DUAL VOICE COIL JUMPER SYSTEM
The push-type insert terminals help reduce the installation time of the S-Series subwoofers. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal.
STRONTIUM FERRITE DOUBLE-STACKED MAGNETS
The S-Series subwoofers use two strontium ferrite magnets stacked together, for increased motor strength and excursion which ultimately leads to more bass output.
CLEAN, CONCEALED MOUNT GASKET SYSTEM
The S-Series subwoofers have concealed mount gaskets, creating a clean, finished appearance for any vehicle.
All S-Series subwoofers are compatible with optional grilles (sold separately) to provide added protection to the cone. The grilles feature a mesh design with a S-Series logo badge. Choose from the following to match the size of your subwoofer; all grilles are sold as single pieces.
- KTE-8G: For 8 S-Series Subwoofers
- KTE-10G.2: For 10 S-Series Subwoofers
- KTE-12G.2: For 12 S-Series Subwoofers